Audio Splitter or also known as press box is a device with multipe outputs of a single audio source. It allows people that are connected to record the microphone/s. Audio Splitter is a professional solution for every press event that allows all members of the press to gain full access to the audio.
AudioPressBox’s® implements and distributes an input signal to multiple independent outputs. Here at AudioPressBox we take wishes and requests into serious consideration and that is why we managed over time through a close work with our clients to manufacture unique range of Audio Splitter devices suitable for both System Integrators and Rental companies.
We ensure that every device has the highest quality standards and always exceeds our customers expectations.
AudioPressBox® is a Audio Splitter device developed and manufactured by a European company MediaTech Central Europe.
Portable
Portable AudioPressBox Audio Splitter devices are suitable for both indoor and outdoor press conferences. The devices include a rechargeable Li-Ion accu pack, and do not require power from the main to operate, gives the user countless possibilities of use.
Installation
Fixed installation AudioPressBox devices are valued by the system integrators as it gives them a lot of options for the use in their projects. The wide range of Audio Splitter devices gives the freedom to choose the right solution for every single project.
Dante
Dante-enabled AudioPressBoxes are the perfect match for your Dante system. Our mult box devices are suitable for both indoor (fixed installation and rack) and outdoor (portable) use. Their ability to swap between analog and digital input/s make them flexible for every press event.
USB-C
AudioPressBox® devices equipped with USB-C In&Out ensure seamless connectivity for modern setups. Suitable for both indoor (fixed installations, rack-mounted) and outdoor (portable) use, they allow easy switching between analog and digital inputs.
Are you looking for full service of audio solutions? Look for AudioPressBox®! Indoor and outdoor audio solutions with press box are exactly what we offer to our customers. Mobile press box are intended for outdoor conferences. In our offer you can find all in one solution which provides you system capable of running for more than ten hours. You can direct 4 singular inputs to 96 outputs with this all in one solution if you join it with the extenders available in our offer.
Professional portable, active, pressbox with 2 Analog Line/Mic inputs, 1 Digital USB-C input & output and 16 Analog Line/Mic & 4 Digital USB-C outputs. It is suitable for both indoor and outdoor press conferences due to built-in rechargeable accu pack and heavy duty Nanuk case. The USB-C also allows a video conference in & out connection for a hybrid press conference.
- 2 Analog MIC (phantom power) / LINE inputs – balanced with gain control and 26dB PAD
- 1 Digital USB-C input & output
- 16 Analog XLR balanced and individually transformer isolated outputs
- XLR outputs are switchable between MIC or LINE output level
- 4 Digital USB-C outputs
- Built-in Compressor and Limiter for Analog (XLR) inputs
- Li-Ion AccuPack with microprocessor controlled battery management
- 20 hours battery operation time. Note: AccuPack is placed (built-in) inside the unit
- On unit printed QR code for online access to manual, user guide and video guide
- 2 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- 1 Channel DANTE Input – RJ45 ethercon
- 16 balanced and individually transformer isolated outputs
- Each Output is switchable between MIC or LINE output level
- Built-in Compressor and Limiter for each Input
- Li-Ion AccuPack with microprocessor controlled battery management
- 20 hours battery operation time. Note: AccuPack is placed (built-in) inside the unit
- On unit printed QR code for online access to manual, user guide and video guide
- 2 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- 16 balanced and individually transformer isolated outputs
- Each Output is switchable between MIC or LINE output level
- Built-in Compressor and Limiter for each Input
- Li-Ion AccuPack with microprocessor controlled battery management
- 10 hours battery operation time. Note: AccuPack is placed (built-in) inside the unit
APB-112 SB-D – Active, Portable, AudioPressBox unit, 1 channel DANTE input, 12 LINE/Mic outputs
- 1 channel DANTE input – RJ45 ethercon
- 12 high quality balanced, individually transformer isolated outputs.
- Each output is switchable between Line or MIC level.
- The unit is powered only via PoE from DANTE network
- Thanks to DANTE patching you can easily expand number of channels or number of outputs by adding other APB-112 SB-D
- 1 MIC (phantom power) / LINE Input – balanced with gain control and 26dB PAD
- 16 High quality internal balanced Outputs, independent transformer isolated
- Each Output is switchable between MIC or LINE level
- Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output
- Li-Ion AccuPack with microprocessor controlled battery management
- 10 hour full load capacity. Note: AccuPack is placed inside the unit
- 1 LINE Input – balanced with ajustable gain -10db to +20 dB
- 16 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- Built in High-Pass filter on the frequency of 40Hz
- Switchable Compressor and Limiter for Input channel
- Nominal Output level is selectable -6 dBu, 0 dBu, +4 dBu and +6 dBu
- Li-Ion AccuPack with microprocessor controlled battery management
- 10 hour full load capacity. Note: AccuPack is placed inside the unit
- 1 MIC (phantom power) / LINE Input – balanced with gain control and 26dB PAD
- 24 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- Constant level Test signal oscillator with no mistake switch operation
- Li-Ion AccuPack with microprocessor controlled battery management
- 8 hour full load capacity. Note: AccuPack is placed inside the unit
- 2 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- Each Input is routable to A/(A+B)/B Outputs Group
- 24 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 12x Output A and 12x Output B
- Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- PFL/AFL for each Input/Output channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output for PFL/AFL
- Li-Ion AccuPack with microprocessor controlled battery management
- 10 hour full load capacity. Note: AccuPack is placed inside the unit
- 4 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- Each Input is routable to A/(A+B)/B Outputs Group
- 16 High quality independent transformer balanced and isolated outputs
- Each Outputs is switchable between MIC or LINE level
- 2 internal Output Groups: 8x Output A and 8x Output B
- Switchable High-Pass filter for each Input channels
- Switchable Compressor and Limiter for each Input channel
- PFL/AFL for each Input/Output channels
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output for PFL/AFL
- Li-Ion AccuPack with microprocessor controlled battery management
- 10 hour full load capacity. Note: AccuPack is placed inside the unit
APB-1.32 CB – Portable AudioPressBox bundle with 1 Drive unit (D100) and 4 Portable expanders each with 8 LINE/MIC outputs (008 SB-EX)
A professional portable active press box bundle consisting of a AudioPressBox drive unit and AudioPressBox portable expanders. It features 1 Line Input and 32 Line/Mic Outputs.
1x APB-D100 drive unit:
- 1 balanced LINE Input
- Switchable High-Pass filter
- Switchable Compressor and Limiter for Input channel
- 2 separately buffered Outputs
4x APB-008 SB-EX expanders:
- 1 balanced Input for APB drive unit with link Output for another unit
- 8 High quality balanced Outputs, independent transformer isolated and switchable LINE or MIC Output level.
- 4 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- Each Input is routable to A/(A+B)/B Outputs Group
- 48 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 24x Output A and 24x Output B
- 2 separate buffered A and B Outputs for driving up to 48 channels of passive extenders: APB-024 R-EX, APB-008 IW/OW, APB 008FB, APB P008 IW/OW or APB-P112
- Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- PFL/AFL for each Input/Output channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output for PFL/AFL
- Li-Ion AccuPack with microprocessor controlled battery management
- 8 hour full load capacity. Note: AccuPack is placed inside the unit
- Portable Drive Unit
- 1 Balanced LINE Input
- Switchable High-Pass filter
- Switchable Compressor and Limiter for Input channel
- 2 separately buffered Outputs for 6 AudioPressBox 8-LINE/MIC output expanders.
- 1x Balanced LINE Input
- 8x High quality internal balanced Outputs, independent transformer isolated
- Each Output is switchable between MIC or LINE level
- 1 balanced LINE Input
- 12 High quality independent transformer balanced and isolated outputs
- 1 MIC (phantom power) / LINE Input – balanced with gain control and 26dB PAD
- 16 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 8x Output A and 8x Output B
- Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output
High quality audio goods and press box for professional press people are the major part of production and broadcasting of AudioPressBox® company. The reason why they are so popular is that their installation and manipulation with them is really easy. Thanks to press box and installation of the extenders you can set four input microphones, line them individually to two groups or line signals to various places. If you need help with the installation of press box, you can find it online or you can contact team of AudioPressBox® via phone or e-mail.
- 1 channel DANTE input – RJ45
- 12 high quality balanced and individually transformer isolated outputs
- Each Output is switchable between MIC or LINE output level
- The unit is powered only via PoE from DANTE network
- Thanks to DANTe patching you can easily expand number of channels or number of outputs by adding other APB-112 IW-D
- The easy install allows quick setup
- 1 channel DANTE input – RJ45 ethercon
- 12 high quality balanced, individually transformer isolated outputs.toto
- each output is switchable between Line or MIC level.
- the unit is powered only via PoE from DANTE network
- thanks to DANTe patching you can easily expand number of channels or number of outputs by adding other APB-112 OW-D
- Active Rack APB
- 1 Line/Dante In / 16 Out
- Drive unit, DANTE toto
- Active Rack APB
- 2 Line/Dante In / 16 Out
- Drive unit, DANTE toto
- Rack Drive Unit
- 1 Balanced LINE Input
- Switchable High-Pass filter
- Switchable Compressor and Limiter for Input channel
- 2 separately buffered Outputs for 6 AudioPressBox 8- LINE/MIC output expanders
- Rack Drive Unit
- 2 Balanced LINE Inputs
- Switchable High-Pass filter
- Switchable Compressor and Limiter for Input channels
- 4 separately buffered Outputs for 12 AudioPressBox 8-output expanders
- Professional active 19” rack AudioPressBox Drive unit
- DANTE interface – 2 channels
- 2 Channels (balanced LINE Input / DANTE)
- Switchable High-Pass filter for for each Input channel
- Switchable Compressor and Limiter for for each Input channel
- 4 separately buffered Outputs (2 for each channel) that can drive 6x APB-008 or 2x APB-024 Output expanders.
- Maximum drive capacity 96 Line or Mic Outputs.
- 2 MIC (phantom power) / LINE Input – balanced with gain control and 26dB PAD
- Each Input is routable to A/(A+B)/B Outputs Group
- 8 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 4x Output A and 4x Output B
- 2 separate buffered A and B Outputs for driving up to 48 channels of passive
extenders: APB-024 R-EX, APB-008 IW/OW, APB 008FB, APB P008 IW/OW or
APB-P112 - Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- PFL/AFL for each Input/Output channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output for PFL/AFL
- 4 MIC (phantom power) / LINE Inputs – balanced with gain control and 26dB PAD
- Each Input is routable to A/(A+B)/B Outputs Group
- 4 separate buffered A and B Outputs for driving up to 48 channels of passive
extenders: APB-024 R-EX, APB-008 IW/OW, APB 008FB, APB P008 IW/OW or
APB-P112 - Switchable High-Pass filter for each Input channel
- Switchable Compressor and Limiter for each Input channel
- PFL/AFL for each Input/Output channel
- Constant level Test signal oscillator with no mistake switch operation
- Headphones control Output for PFL/AFL
You can use extenders to press box every time you need more output signals. They are mainly used in the places where you want to distribute one signal in more rooms. AudioPressBox® company offers its customers only press box extenders with the best quality. You can extend your press box to 96 outputs with these extenders.
It does not matter what you will choose from our products because everything (press box, extenders and other accessories) is made in the highest quality standards. It means that you can without any problems rely on the products offered on our website. If you are looking for more information about press box, you can find them on our website in the specification next to every product.
- 24 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 12x Output A and 12x Output B
- 8 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 4x Output A and 4x Output B
- 8 High quality independent transformer balanced and isolated outputs
- 8 High quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 4x Output A and 4x Output B
- 8 High quality independent transformer balanced and isolated outputs
- 8 high quality independent transformer balanced and isolated outputs
- Each Output is switchable between MIC or LINE level
- 2 internal Output Groups: 4x Output A and 4x Output B
However, press box and extenders are not everything what we offer to our clients. You can find also other functional accessories like cases for press box or recording cables on our website. Cases for press box are great helpers if you want to carry your audio box from place to place. On the one hand they protect it, on the other hand they will help you to carry them more practically with all accessories like cables, charges and so on. Recording cables connect together more recording devices which have 3,5mm Jack Mic or Line input.
RC 3,5 – 1 is single cable designed for connecting separate recording equipment with 3,5mm Jack Mic or Line input, regardless Stereo or Mono input jack configuration. Special electronic curcuit built-in XLR connector provide level and impedance matching and DC blocking.
RC 3,5 – 8 is eightfold cable designed for connecting eight separate recording equipment with 3,5mm Jack Mic or Line input, regardless Stereo or Mono input jack configuration. Special electronic curcuit built-in XLR connector provide level and impedance matching and DC blocking.
CChC is cable for charging APB-116SB from 12/24V car Cigarette Lighter outlet
You can find the list of our resellers/dealers worldwide in our where to buy section or you can contact us directly at: sales@audiopressbox.com
Contact us
Do not hesitate to get in touch with us. We are here to answer any questions or requests you might have.